Thursday, May 20, 2021

How to slove the Sd Connect 749 Error

 

Sd Connect 749 Error – (Fixed) SD C4 2019.9 error “the network connection to the …. No connection to the control units in the vehicle. It dosent change to green. Mb sd connect c4 multiplex works with mercedes star software. More question about MB Star C4. Mercedes star diagnosis c4 (sd connect c4).

Collection of most concerned mb sdconnect das xentry errors / failures and working solutions by www.obd2tool.com senior engineer. Display module sd connect c4. It results from incorrect ip setup. To solve sd connect c4 error code 204, just put fresh 6 battery and do a csd firmware update. Firstly, make sure epc is.

How-to-slove-the-Sd-Connect-749-Error-1

Due to network problems, no connection to the sdconnect can be establish (749). This post is long but most helpful; It means your sdconnect firmware files are deleted and you need update sd c4 firmware. Assuming that your wire connection works ok, check if your road24h is showing in wireless networks list also never ever allow the sd connect to take the firmware update. To get rid of the update message, rename the three update. And when i connect between a car and the green cable to my laptopn. This is a common problem with cheap sd c4. It can diagnose and program for all bens cars trucks,bus and orther vehicles.

It dosent change to green.

This is a common problem with cheap sd c4. Mb sd connect c4 multiplex works with mercedes star software. Due to network problems, no connection to the sdconnect can be establish (749). It means your sdconnect firmware files are deleted and you need update sd c4 firmware. It dosent change to green. I’m using software 12/2015 xdos after connecting to the internet and adding the newest addons no there is no possibility to conect the mux via sd toolkit and so there is no chance to make any changes i have this exact problem error error 749 and 748. Newest update v2018.12 mb sd c4 connect compact 4 mercedes benz cars and trucks diagnostic tool support wireless and lan cable connection, support k line,can bus and uds protocol. To solve sd connect c4 error code 204, just put fresh 6 battery and do a csd firmware update. It will be a brick if it does. Assuming that your wire connection works ok, check if your road24h is showing in wireless networks list also never ever allow the sd connect to take the firmware update. When i open epc of msd connect 4, i got error message unable to start application program, what’s the reason? And when i connect between a car and the green cable to my laptopn. Pay only $475 you could get one new mb sdconnect now.

Start the sdconnect toolkit via sdnetcontrol. No connection to the control units in the vehicle. It means your sdconnect firmware files are deleted and you need update sd c4 firmware. Sd connect c4 firmware files are lost and wifi cannot be set up. Mb sd connect c4 is the professional obd diagnostic tool for mercedes benz cars and trucks.

How-to-slove-the-Sd-Connect-749-Error-2

It can diagnose and program for all bens cars trucks,bus and orther vehicles. Assuming that your wire connection works ok, check if your road24h is showing in wireless networks list also never ever allow the sd connect to take the firmware update. Please add to your favorites. I did change the platform to (w). Mb sd connect c4 is the professional obd diagnostic tool for mercedes benz cars and trucks. No sdconnect is selected or the desired sdconnect cannot be. Mercedes sdconnect c4 display board pcb. In detail… 4.3 cover the rubber and fix the screws to finish all the work.

Sdconnect could not be configured.

Sdconnect tool kit appears error 749 in administration. It can diagnose and program for all bens cars trucks,bus and orther vehicles. Sdconnect tool kit appears error 749 in administration.due to network problems, no connection to the sdconnect can be establish (749)no sdconnect is selected or the desired sdconnect cannot be selected. To get rid of the update message, rename the three update. Due to network problems, no connection to the sdconnect can be establish (749)no solution: In detail… 4.3 cover the rubber and fix the screws to finish all the work. The funny icons down beside the start stays red. Pay only $475 you could get one new mb sdconnect now. To solve sd connect c4 error code 204, just put fresh 6 battery and do a csd firmware update. Please go to the network connect to wlan set up ip: Display module sd connect c4. No connection to the control units in the vehicle. I just bought the new multiplexer.

Select the port the printer is connected to from the drop down window beside use an existing port, click next. Sometimes these errors that are this critical cause the driver to lock up and not poll the printer to see if the error is gone and a hard reset like this is necessary. I installed xdos 5 2016 connected sdconnect and got. More question about mb star c4. Collection of most concerned mb sdconnect das xentry errors / failures and working solutions by www.uobdii.com senior engineer.

How-to-slove-the-Sd-Connect-749-Error-3

Sdconnect tool kit appears error 749 in administration. I did change the platform to (w). Sometimes these errors that are this critical cause the driver to lock up and not poll the printer to see if the error is gone and a hard reset like this is necessary. I installed xdos 5 2016 connected sdconnect and got. Mercedes sdconnect c4 display board pcb. I’m using software 12/2015 xdos after connecting to the internet and adding the newest addons no there is no possibility to conect the mux via sd toolkit and so there is no chance to make any changes i have this exact problem error error 749 and 748. It results from incorrect ip setup. Assuming that your wire connection works ok, check if your road24h is showing in wireless networks list also never ever allow the sd connect to take the firmware update.

I just bought the new multiplexer.

Sdconnect could not be configured. It means your sdconnect firmware files are deleted and you need update sd c4 firmware. This post is long but most helpful; About the origin of the error, i don’t know very much what could have happened, i only know that after playing a little bit of a game, the next day the error started to occurred the error. Please go to the network connect to wlan set up ip: Please go to the network connect to wlan set up ip: It can diagnose and program for all bens cars trucks,bus and orther vehicles. To solve sd connect c4 error code 204, just put fresh 6 battery and do a csd firmware update. In detail… 4.3 cover the rubber and fix the screws to finish all the work. So, every time i power on the console, i get this on the screen: I did change the platform to (w). 749 error is caused by incorrect networking configuration. Sdconnect tool kit appears error 749 in administration.

How-to-slove-the-Sd-Connect-749-Error-4

This is a common problem with cheap sd c4. To solve sd connect c4 error code 204, just put fresh 6 battery and do a csd firmware update. Mercedes sdconnect c4 display board pcb. No sdconnect is selected or the desired sdconnect cannot be. Due to network problems, no connection to the sdconnect can be establish (749).

How-to-slove-the-Sd-Connect-749-Error-5

This is a common problem with cheap sd c4. Please go to the network connect to wlan set up ip: In the next window select epson under manufacturers and your printer model under printers. In detail… 4.3 cover the rubber and fix the screws to finish all the work. To get rid of the update message, rename the three update.

How-to-slove-the-Sd-Connect-749-Error-6

Full upgrade (s/n, shutdown, error batteries). And when i connect between a car and the green cable to my laptopn. So, every time i power on the console, i get this on the screen: Sometimes these errors that are this critical cause the driver to lock up and not poll the printer to see if the error is gone and a hard reset like this is necessary. In detail… 4.3 cover the rubber and fix the screws to finish all the work.

How-to-slove-the-Sd-Connect-749-Error-7

Please go to the network connect to wlan set up ip: It can diagnose and program for all bens cars trucks,bus and orther vehicles. Sd connect c4 firmware files are lost and wifi cannot be set up. Select the port the printer is connected to from the drop down window beside use an existing port, click next. When i open epc of msd connect 4, i got error message unable to start application program, what’s the reason?

How-to-slove-the-Sd-Connect-749-Error-8

Start the sdconnect toolkit via sdnetcontrol. Please go to the network connect to wlan set up ip: In the next window select epson under manufacturers and your printer model under printers. It can diagnose and program for all bens cars trucks,bus and orther vehicles. Mercedes sdconnect c4 display board pcb.

How-to-slove-the-Sd-Connect-749-Error-10

749 error is caused by incorrect networking configuration. It means your sdconnect firmware files are deleted and you need update sd c4 firmware. The funny icons down beside the start stays red. When i open epc of msd connect 4, i got error message unable to start application program, what’s the reason? I’m using software 12/2015 xdos after connecting to the internet and adding the newest addons no there is no possibility to conect the mux via sd toolkit and so there is no chance to make any changes i have this exact problem error error 749 and 748.

How-to-slove-the-Sd-Connect-749-Error-11

Please add to your favorites. I installed xdos 5 2016 connected sdconnect and got. This post is long but most helpful; 749 error is caused by incorrect networking configuration. Firstly, make sure epc is.

How-to-slove-the-Sd-Connect-749-Error-9

Mb sd connect c4 is the professional obd diagnostic tool for mercedes benz cars and trucks. I installed xdos 5 2016 connected sdconnect and got. Display module sd connect c4. And when i connect between a car and the green cable to my laptopn. About the origin of the error, i don’t know very much what could have happened, i only know that after playing a little bit of a game, the next day the error started to occurred the error.

How-to-slove-the-Sd-Connect-749-Error-12

More question about mb star c4. No sdconnect is selected or the desired sdconnect cannot be. And when i connect between a car and the green cable to my laptopn. In the next window select epson under manufacturers and your printer model under printers. To solve sd connect c4 error code 204, just put fresh 6 battery and do a csd firmware update.

How-to-slove-the-Sd-Connect-749-Error-13

Sdconnect tool kit appears error 749 in administration.

How-to-slove-the-Sd-Connect-749-Error-14

It results from incorrect ip setup.

How-to-slove-the-Sd-Connect-749-Error-15

It results from incorrect ip setup.

How-to-slove-the-Sd-Connect-749-Error-16

Mb sd connect c4 is the professional MB Star diagnostic tool for mercedes benz cars and trucks.

How-to-slove-the-Sd-Connect-749-Error-17

Pay only $475 you could get one new mb sdconnect now.

How-to-slove-the-Sd-Connect-749-Error-18

It results from incorrect ip setup.

How-to-slove-the-Sd-Connect-749-Error-19

Mb sd connect c4 multiplex works with mercedes star software.

How-to-slove-the-Sd-Connect-749-Error-20

Mercedes sdconnect c4 display board pcb.

How-to-slove-the-Sd-Connect-749-Error-21

Sometimes these errors that are this critical cause the driver to lock up and not poll the printer to see if the error is gone and a hard reset like this is necessary.

How-to-slove-the-Sd-Connect-749-Error-22

Sd connect c4 firmware files are lost and wifi cannot be set up.

How-to-slove-the-Sd-Connect-749-Error-23

It means your sdconnect firmware files are deleted and you need update sd c4 firmware.

How-to-slove-the-Sd-Connect-749-Error-24

Mercedes sdconnect c4 display board pcb.

How-to-slove-the-Sd-Connect-749-Error-25

Mercedes sdconnect c4 display board pcb.

How-to-slove-the-Sd-Connect-749-Error-26

749 error is caused by incorrect networking configuration.

How-to-slove-the-Sd-Connect-749-Error-27

And when i connect between a car and the green cable to my laptopn.

How-to-slove-the-Sd-Connect-749-Error-28

It dosent change to green.

About the origin of the error, i don’t know very much what could have happened, i only know that after playing a little bit of a game, the next day the error started to occurred the error.

How-to-slove-the-Sd-Connect-749-Error-29

In detail… 4.3 cover the rubber and fix the screws to finish all the work.

How-to-slove-the-Sd-Connect-749-Error-30

Firstly, make sure epc is.

How-to-slove-the-Sd-Connect-749-Error-31

No sdconnect is selected or the desired sdconnect cannot be.

How-to-slove-the-Sd-Connect-749-Error-32

The funny icons down beside the start stays red.

How-to-slove-the-Sd-Connect-749-Error-33

Mercedes star diagnosis c4 (sd connect c4).

How-to-slove-the-Sd-Connect-749-Error-34


Wednesday, May 19, 2021

How to fix Super MB Star C3 “Error 23 H1.First Install.exe” Issue

 

mb-star-c3-error

Dear Cathy:

I recently got a Super MB Star C3 from OBD2TOOL for my Mercedes 2009. I got the Mb Star C3 device two days ago, tried installing it on the same day, but got an error message, reading “Error 23, while reading from H:\1.First Install.exe”, as shown below, during the installation.

mb-star-c3-error

At frist, I installed the Mercedes STAR C3 diagnostic tool on a Windows XP computer, then I tried on another computer with windows 7 system, but the windows kept popping out. Please help me fix it, thanks.

Jason

Dear Jason:

The error is probably caused by your system, which may not compatible with the tool. It is required that Super MB Star C3 should run in computer environment with professional Microsoft Window XP or Windows 7 system.

Or it is because the software is damaged. If there is a software, the device cannot work normally. If the software damaged is Xentry, you should send it back to us for repair; if it is other softwares, please download a replacement on https://my.vmware.com/web/vmware/info/slug/desktop_end_user_computing/vmware_workstation/8_0

Tuesday, May 18, 2021

How to use MB STAR SD C4 to activate Benz 211 unlock and lock beep

 

Recently some customers asked about MB SD C4 programming capability. Here obd2eshop engineers have made a guide on activate Benz 211 unlock and lock beep with MB SD C4 diagnostic tool for your reference.

Car Model:
Mercedes Benz W211

Tools you need:
MB SD C4 Diagnostic Tool
This is my experience of how to activate the unlock and lock beep on my Mercedes E55, with sd connect c4 mux. I found ask for help about this, and i would like to share my experience with a few Mercedes brothers. Hope this helps in deed.

Model:
Mercedes Benz E55 AMG (W211) ‘2008
mb star
Tools i used:
SD connect compact 4 diagnostic mux
Dell laptop D630

How-to-use-MB-STAR-SD-C4-to-activate-Benz-211-unlock-and-lock-beep-1

(here i highly recommend you esp. for new uses to buy plug-and-play diagnostic bundles- mux with laptop, for it could avoid lots of installation problems and can be used directly when get it. To save money, i used new sd c4 and second-hand laptop.)

The procedure of activation of the unlock and lock beep
Open the laptop and Xentry.

Connect the sd c4 mux with the car.
For connection diagram, i referred to mbstarshop and most of problem can be found and solved by their technicians.

For the laptop and c4 mux, i used wireless connection.

Open software Xentry.

Model series selection: 211

How-to-use-MB-STAR-SD-C4-to-activate-Benz-211-unlock-and-lock-beep-2

This is the main menu

How-to-use-MB-STAR-SD-C4-to-activate-Benz-211-unlock-and-lock-beep-3

Select Control units
How-to-use-MB-STAR-SD-C4-to-activate-Benz-211-unlock-and-lock-beep-4

Then Body
How-to-use-MB-STAR-SD-C4-to-activate-Benz-211-unlock-and-lock-beep-5

Then rear SAM – rear signal acquisition and actuation module

How-to-use-MB-STAR-SD-C4-to-activate-Benz-211-unlock-and-lock-beep-6

Then Control unit adaptations

How-to-use-MB-STAR-SD-C4-to-activate-Benz-211-unlock-and-lock-beep-7

Then national version of ATA function

How-to-use-MB-STAR-SD-C4-to-activate-Benz-211-unlock-and-lock-beep-8

At this screen you will see a pull down menu with a list of different regions on it. The only ones you need to worry about are USA with buzzer and Netherlands. If you choose USA, I will give you three short quick beeps when you lock the car and one short when you unlock it. Netherlands will give you three longer beeps when you lock the car and one long when you unlock it. Personal preference on which one you like. Here i select USA with buzzer.Then hit F3

How-to-use-MB-STAR-SD-C4-to-activate-Benz-211-unlock-and-lock-beep-9

Then F3(YES)

How-to-use-MB-STAR-SD-C4-to-activate-Benz-211-unlock-and-lock-beep-10

Done!

Hope this helps

Monday, May 17, 2021

How to use MB Star C5 hard disk and how to update Star C5

MB Star C5 moveable hard disk is used for containing Xentry DAS, please do not use it as a computer system hard disk.

Here two tips to follow.

Option 1. you use C5 disk on your own computer. Tip: advice you not rework it or dismantle it and plug it to the computer to modify the data.

Option 2. you buy the extra computer together with Star Diagnostic MB Star C5, then you are advised to prepare one blank hard disk for system installation because the computer you bought doesn’t come with hard disk.

How-to-use-MB-Star-C5-hard-disk-and-how-to-update-Star-C5-1

How to update DoIP Xentry Connect C5?

Usually you are required to send back the MB Star C5 hard disk for update unless the engineers can make out the updating software for download.

Attach one picture which shows the hard disk location in the C5 mux.

How-to-use-MB-Star-C5-hard-disk-and-how-to-update-Star-C5-2

Sunday, May 16, 2021

mb sd c4 xentry data can not save? how to solve?

The MB SD C4 i bought can not save the xentry data, each time i need to reactivate it and then paste the code again, it is too much time-costing.

i chat with chinacardiags.com online services, chat with seven, and she helped me to solve the problem.

Just share with you.

Firstly: find  the directory:  C:ProgramData/LicDir and then delete the other files except:

only keep the three files,

and  secondly activate the xentry by yourself with keygen or send to seller’s Email: sales@obd2tool.com to get activation code to activate it.

thirdly: go to  C:ProgramData/LicDir and find the data lic_key_2.dat, copy it and paste it, and then rename the file to  lic_key_2.x4711.

and then click it yes. and right click it and make it as read only.

Saturday, May 15, 2021

Tips on Sdconnect C4 WIS EPC activation

I have mb Sdconnect C4 to activate code for WIS, EPC, xentry and dts Monaco, and then contacted obd2tool.com engineer and they said ” You can send the activation id to calculate the password, or send it to teamviewer to activate the software for you remotely”, then they connected with teamviewer for Activation code for WIS and EPC, but for some reason hardware id changed (Lan Id is different. Probably because WiFi is on) and then Xentry doesn’t start.

wis-epc-activation

obd2tool.com engineer replied me:

Follow the steps below;

*   Delete the lic-key2.dat file under the C drive directory

(C:/Programdata/LicDir)

*   The activation code of xentry is still deactivated by the one given to you before, and then a new lic-key2.dat will be generated under the C drive directory (C:/Programdata/LicDir)
*   Copy a copy of lic-key2.dat, change the copy to a lic-key2.x4711 file, and then set the file attribute to read-only

Update!

Everything ok now. Xentry,Wis and Epc starts. Know i have to test the Sd connect C4 to a car.

Many thanks for their professional after-sale service.
loading..

Friday, May 14, 2021

MB SD C4 EWA Local Host Cannot be reached

Problem:

I tried to enter local host in MB SD Connect C4 EWA software program, it failed me and reported error “This site cannot be reached”
mb-sd-c4-ews-This-site-cannot-be-reached-1

Solution:
Press windows icon on the tool bar. Find EWA program
Right click to open EWA as administrator
Then Started EWA server
It will show online status if it is working.
mb-sd-c4-ews-This-site-cannot-be-reached-3
mb-sd-c4-ews-This-site-cannot-be-reached-4
mb-sd-c4-ews-This-site-cannot-be-reached-5

www.obd2tool.com
loading..