How to install MB SD C4 rechargeable batteries

 

Problem:

Hello MB star

I just recieved My tablet and it looks and work Very good .

But The sd connect interface is Saying “please put in batteries”

What type of batteries is it ?

Solution:

This problem same to :

SD connect compact 4 mux display: Favor inserir baterias(Please insert batteries)

Here you go :

Please prepare the following tools:

①— SDconnect multiplexer which need to input the batteries。

②— 6 units Ni-MH Rechargeable batteries，Size：AA， Voltage：1.2V， Capacity：above 1700mA。

③— 1 unit 108M WIFI Card。

④— Plum screwdriver，Specification：T-20

Take out the rubber:

2.1 Use the T20 Plum screwdriver to take out the screws as below.

2.2 Take out the rubber as below.

①— Batteries Space.

②— WIFI Card Space.

③— SD Card Space.

Insert the Rechargeable batteries.

3.1 Use the T20 Plum screwdriver to take out the screws of Batteries Space fixation as below.

3.2 Take out the fixation of Batteries Space. Pay attention to the Battery polarity marked in the Batteries Space.

3.3 Insert the batteries. Note the Battery polarity.

3.4 Button on the Fixation of Batteries Space after inputting the Rechargeable batteries.

3.5 Use the T20 Plum screwdriver to fix the screws of Batteries Space fixation as below. Inserting the batteries is finished.

Installing WIFI Card.

4.1 Inserting the WIFI Card into the WIFI Card Space. Please make the correct direction.

4.2 Push it to make it totally connected.

4.3 Cover the rubber and fix the screws to finish all the work.

Note 1:

Go to the info section within DAS Xentry— search SDconnect and you will find what all the SDconnect symbols defined!!

Note 2:

pls check these picture, you can choose self-diagnosis your SD connect c4

MB SD C4 Device not connection solution

One of our customer had the device not connection problem when using Mercedes MB SD Connect C4 diagnostic system. Here is the working solution provided by Obd2tool.com engineer.

Solution:
You are required to update the MB SD C4 firmware follow the guide here:
1.  Install SD Connect C4 battery
2.  Update SDConnect
He did follow the solution but still had the file for software update error

The problem is that the names are wrong in file “SDconnect Toolkit “, you need to correct them as:
Update_automatic , Update_manual ; Update_Special

Customer feedback:
this was the right solution of the Problem.
The Names were wrong.
Thank you very much for your help.

Super Engineering Software DTS monaco And Vediamo for Mercedes Benz mb star c4

Now there is a newest software called DTS monaco for MB Star C4, it is better than Vediamo software,  this is a good news for mercedes benz repair shops
 DTS maonaco software can achieve separate programming, scan entire vehicle software code, read entire vehicle setting code data, It truly one-button operation, Keep entire vehicle data is not a dream.

DTS-monaco for mb sd connect c4 benz diagnostic tool  introduction：
1.DTS-monaco is the official software used by Daimler Benz development engineers
2.DTS Monaco is universal engineering test terminal for the diagnosis and control function of the vehicle controller, The name Monaco is derived from the modular analyzer used in vehicle traffic
3.DTS Monaco covers all the tasks in the field of engineering, testing and production test preparation
4.When MB Star Diagnosis maintenance test it is the greatest authority，the perfect support for C4（SDconnect) and (Ecom) Hardware(at present, Das-xentry.Vediamo lower authority)

DTS-monaco special feature：
1.Quick Test；Entire vehicle ECU quick test, and the test can choose to edit more
2.Variant Coding； Coding with variation add VO- delete VO function
3.ID identification ； One click to read the whole car and save all modules programmed numbers
4.Complete Variant Coding； One time to read all the ECU coding vehicle data, can be written to the vehicle again, completely off-line operation
5.Diagnostic Services； Advanced features can see your choice of internal and external data module, turn on the computer authorization(not driving license), Activate ECU, reset ECU, modifying the original chassis number
6.Flash programming； Fully offline programming
7.Diagnostic Trouble Code； Diagnostic module DTC fault code
8.ECU Exchange； Two of the same ECU, by reading data import data exchange
9.Symbolic trace： Record and track the file, after repeated viewing, analysis of fault logic point

http://www.obd2tool.com/blog/2016/08/26/super-engineering-software-dts-monaco-and-vediamo-for-mercedes-benz-mb-star-c4/