Tutorial: how to activate/register Xentry and update vxdiag benz multi tool vci firmware.
The procedure can be applied to:
VXDIAG Benz C6 doip
OEM Benz C6 using VXDIAG solution
Xentry DAS does not require activation. Ready to use.
DTS Monaco engineer software requires USB connection with vxdiag c6 and laptop
EPC WIS requires activation.
How to activate Vxdiag Benz C6 EPC WIS Software?
Open WIS-EPC admin12345 on desktop
Enter User name: admin and password: 12345
Open EWS-net brower
Select Administration->Server->Edit the access authorization
Find WIS/ASRA activation Startkey in Tools folder. Copy and paste ID and activation key to corresponding area. Then press Save.
Note: If it shows unknown LAN-ID error when open EPC-WIS brower, it indicates that you did not install NIC driver. Or uninstall and reinstall NIC driver again.
Go to Programs to check activation status
Activation is done. EPS and WIS successfully registered.
Update Benz C6 VCI Firmware
Open VX Manager driver on desktop
Go to Diagnostic to install Benz driver
Choose Benz program and install benz C6 driver
Press Firmware to run VCI update
Updating vci firmware in progress. Wait until it finished.\
VXDIAG C6 Benz multi tool is ready to use.
No comments:
Post a Comment