Thursday, September 30, 2021

What do you know about Mercedes Benz C6

 

Mercedes Benz C6 OEM Xentry diagnosis VCI DOIP Pass thur interfac is the latest interface for For Mercedes & SMART vehicles can replace Star C4/C5. XENTRY Diagnosis VCI acts as a Pass-through Interface, also called MB Star C6, For Benz C6 multiplexer to provide complete communication between a vehicle and the XENTRY software loaded on a PC.

What-do-you-know-about-Mercedes-Benz-C6

Mercedes Benz Xentry diagnosis VCI DOIP Pass thur interface Benz C6 Overview:
Compatible Software: VXDIAG For XENTRY/Das Software
Support Vehicle: Mercede For Benz & Smart vehicles
DoIP: Support DoIP
Functions: Star Diagnostic & programming (SCN Coding)

MB Star C6 Software Description:
1.DAS / Xentry 2021.06
2.WIS net 2019.07
3.EPC net 2018.12: Electronic Parts Catalog
4.ST Finder 2016: optional: a Part location finder
5.SDmedia 2015.01
6.DTS 8.14.016 Monaco
7.VX Manager 1.4.2
8.Vediamo Database (This C6 hardware not support Vediamo)

Notice:
If you choose hardware and software(500G HDD or SSD)
1. Please install the 500GB HDD(SSD) on laptop above 4GB Memory and I5 CPU, and use it on one laptop only.
2. There is keygen in our software HDD(SSD), no need activation by us.
3. This Mercedes Benz Xentry diagnosis VCI DOIP Pass thur interface C6 can’t support All Key Lost,needs one key at least.

Mercedes Benz C6 Vs SD Connect C4:

MBStar is undergoing some major changes, and many services are running online. This began with last year’s EPC catalogue of electronic parts, which is now only online.

Noted the Mercedes Xentry made for SD Connect C4, C5 will not work with C6 VCI because the chinese manufacturers have built C6 VCI to work with only the software they produce, which will be expensive when updating.

Tuesday, September 28, 2021

BENZ C6 Xentry Diagnostic OEM Star C6 Support DoIP

 

Benz C6 is the new OEM xentry diagnostic vci multiplexer which can support DoIP while sd connect c4 can not. BENZ C6 xentry diagnostic vci comes with latest xentry software 2021.06v. Star c6 benz diagnostic tool can support both cars and trucks via obd.

BENZ c6 XENTRY Diagnosis VCI acts as a Pass-through Interface, also called MB Star C6, For Benz C6 multiplexer to provide complete communication between a vehicle and the XENTRY software loaded on a PC. So you also can get the mb star c6 with laptop and software installed set from us, which will be ready to use, no activation needed.

MB Star C6 Software Description:
1.DAS / Xentry 2021.06
2.WIS net 2019.07
3.EPC net 2018.12: Electronic Parts Catalog
4.ST Finder 2016: optional: a Part location finder
5.SDmedia 2015.01
6.DTS 8.14.016 Monaco
7.VX Manager 1.4.2
8.Vediamo Database (This C6 hardware not support Vediamo)

Support DoIP
WiFi Password for BENZ C6 : 12345678
1year warranty with lifetime tech support
Support Vehicle: Mercede For Benz & Smart vehicles
Plus V2021.03 MB Star Software 500GB HDD
Functions: Star Diagnostic & programming (SCN Coding)
Notice :
Please install the 500GB HDD on laptop above 4GB Memory and I5 CPU, and use it on one laptop only. If change laptop, software may get broken and need to ship HDD back to us to copy software again.
ThisMercedes Benz Xentry diagnosis VCI DOIP Pass thur interface C6 can/’t support All Key Lost,needs one key at least.

What is DOIP
DOIP is ISO 13400 diagnostic protocol
ISO 13400-1:2011 describes the general use cases and communication scenarios which are covered by an Internet Protocol-based vehicle communication standard. Each use case drives specific communication capabilities of the vehicle communication interface, for instance in order to be interoperable in an existing computer network.
The diagnostic communication over Internet Protocol (DoIP) protocol supports the standardized service primitive interface as specified in ISO 14229-2.
The descriptions in ISO 13400-1:2011 cover different application layer implementations, such as:
enhanced vehicle diagnostics (system diagnostics beyond legislated functionality, non-emissions-related system diagnostics);
WWH-OBD (World-Wide Harmonized On-Board Diagnostics) as specified in ISO 27145-2 and ISO 27145-3.
The mercedes Land Rover JLR all use this new Diagnostic Protocol now.

Where need DOIP device
when we test mercedes new car like w222 w205
In Audio\Comand section you can find DoIP test page.
If cable is DoIP you will see green mark that DEVICE is Ok.
Xentry will prompt you that other device must carry yellow marks.

Mercedes Benz VCI DoIP C6 Support Functions List:
1.Diagnosing
2.Programming
3.Smulation studying
4.Repair information
5.Automotive maintenance
6.Technical service bulletin
7.DPF Regeneration (work same as original)

DPF Regeneration menu lets you perform the DPF cleaning to clear the blockage through continuous burning of the particulates captured in the DPF filter. Which will avoid the filter being blocked by ash, then the owner has to replace the new diesel particulate filter (worth 1000usd -200usd)

Mercedes Benz Xentry diagnosis VCI DOIP Pass thur interface C6 Features:
Can be used for all model series of For Mercedes For Benz vehicles
Support DoIP, cover more functions during SCN Coding than SD C4/C5
Functions including diagnosing, programming, simulation studying, repair information, automotive maintenance, technical service bulletin and so on
Diagnosis updates no longer necessary – firmware updates required on rare occasions
Does not need a power supply unit for external power supply
Dandy multiplexer with a small, sturdy construction (no PC core, battery, fan, or display)
Engines (All Gasoline & Diesel Systems)
Transmissions and Electronic Selector Modules
Airmatic and Active Body Control Suspension Systems
Traction Systems: ESP / ASR / ETS / ABS / BAS / SBC braking systems
Supplementary Restraint Systems (SRS) / Airbag, All body modules OCP / UCP / LCP / SCM / SKF / KFB / RCM / DCM’s
Drive Authorisation System
Sam (Signal Acquisition) Modules
Electronic Ignition System (EIS)
Pneumatic System Equipment and ATA functions
Air Conditioning / climate control Systems
Instrument Cluster
Tyre Pressure Control
Parktronic System
Keyless Go
D2b Command & Audio Gateway (D2B and MOST networks)
TV Tuner
Headlamp Range Adjustment
Seat Electronics
Rvc, RST & Vario Roof modules
Automatic Clutch System ACS
M-Class Body Modules (AAM / EAM / DAS / SEM / VG Transfer Case)
Assyst & ASSYST + systems

V2021.06 Mercedes BEZN C6 MB SD Connect C6 Benz Xentry diagnosis VCI DOIP &AUDIO PLUS lenovo X220 Laptop

Second Hand Laptop Lenovo X220 Specification:
Brand: Lenovo
Condition: Used
Type: Laptop/Notebook
Screen Size: 14.0
Processor Type: Intel (R) Core(TM) I5-2520M CPU
Processor Speed: 2.50 GHz
Memory: 4GB
Hard Disk:500G HDD

Package list:
1pc x MB STAR C6 Multiplexer
1pc x OBDII Cable
1pc x Lan Cable
1pc x Second Hand Laptop Lenovo X220 Laptop (All software activated. All system ready to use)

Star c6 benz diagnostic tool mainboard PCB Disaply:


Friday, September 24, 2021

How to configure OEM Benz C6 Xentry VCI interface

 

How to configure OEM Benz C6 Xentry VCI Mercedes Benz diagnostic interface?

How-to-configure-OEM-Benz-C6-Xentry-VCI-interface-1

Procedure:

How-to-configure-OEM-Benz-C6-Xentry-VCI-interface-2

Double click “ConfigAssist” on the desktop, select XENTRY Diagnosis VCI

How-to-configure-OEM-Benz-C6-Xentry-VCI-interface-4

Click on Configure

How-to-configure-OEM-Benz-C6-Xentry-VCI-interface-3

Press Continue

How-to-configure-OEM-Benz-C6-Xentry-VCI-interface-5

Press Continue

How-to-configure-OEM-Benz-C6-Xentry-VCI-interface-6

Select Manual and enter StartKey

How-to-configure-OEM-Benz-C6-Xentry-VCI-interface-7

Save StartKey

How-to-configure-OEM-Benz-C6-Xentry-VCI-interface-8

StartKey installed successfully. Press OK to continue

How-to-configure-OEM-Benz-C6-Xentry-VCI-interface-9

Register success. Press Continue.

How-to-configure-OEM-Benz-C6-Xentry-VCI-interface-10

Click on “Couple VCI” to connect VCI

How-to-configure-OEM-Benz-C6-Xentry-VCI-interface-11

Configuration success. Quit.

Wednesday, September 22, 2021

How to Solve Benz Xentry No access Authorization

 

Solution to vxdiag Benz xentry error “No access authorization, You must contact the User Help Desk.

Reason:
Means the License errors, need register again.

How to register Xentry?
If you use the hard disk in the package, you will find a TOOL folder on the desktop, click it and then “1 – StartKeyCenter”.

First open “1-StartKeyCenter” and “2-Key”, enter ID and date, finally press the rectangle button to gain registration code.

Copy and paste the registration code into the StartKey box, press “Save” button.

Get message “StartKey saved successfully.” means the registration succeed.

PS: The final step is to save the registration info, this step is important which can’t be neglected, just Run”3 -Save”.

The solution is applied to the popular V2021.03 Benz C6 OEM DOIP Xentry


Saturday, September 18, 2021

How to update MB Star C6 OEM C6 DoIP Firmware

 

VXDIAG oem C6 Doip software registration and firmware update guide.

1. 2021.03 Xentry and DAS do not need to be activated, use directly.
2. Use one USB cable to connect Vxdiag Benz C6 and the computer to run DTS Monaco super engineering software (dts is activated with usb).
3. epc, wis software activation steps:

How-to-update-MB-Star-C6-OEM-C6-DoIP-Firmware-1
How-to-update-MB-Star-C6-OEM-C6-DoIP-Firmware-2

Login account: admin, password: 12345

How-to-update-MB-Star-C6-OEM-C6-DoIP-Firmware-3
How-to-update-MB-Star-C6-OEM-C6-DoIP-Firmware-4

Note: after opening epc-wis browsed, if you can see lan-id is unknown, the reason is the computer wasn’t installed with NIC driver or you need to uninstall and reinstall the NIC driver.

How-to-update-MB-Star-C6-OEM-C6-DoIP-Firmware-5
How-to-update-MB-Star-C6-OEM-C6-DoIP-Firmware-6

Driver installation:

How-to-update-MB-Star-C6-OEM-C6-DoIP-Firmware-7
How-to-update-MB-Star-C6-OEM-C6-DoIP-Firmware-8

1. Open VX Manager (open www.vxdiag.net, scroll down to download the newest version)
2. lick on “Diagnostic”, then “Benz” icon. If “Install” option light up, click on it; if it is gray, driver is installed successfully (Note: the computer needs to be connected the network, OEM C6 needs to be connected to the car and one computer).

How-to-update-MB-Star-C6-OEM-C6-DoIP-Firmware-9
How-to-update-MB-Star-C6-OEM-C6-DoIP-Firmware-10


Tuesday, September 14, 2021

Wifi Benz C6 OEM DOIP Xentry Das EPC WIS Activation

 

Wifi Benz C6 OEM DOIP Xentry Das EPC WIS Activation

Steps:
Follow the pdf file on the desktop ” Open your STAR SDC4 Guide”.
Note: the activation method is independent of version.

EPC WIS
Open”EWA net”

How-to-Activate-OEM-Benz-C6-1 (2)

Name admin
Password 12345

How-to-Activate-OEM-Benz-C6-2 (2)
How-to-Activate-OEM-Benz-C6-3 (2)
How-to-Activate-OEM-Benz-C6-4 (2)
How-to-Activate-OEM-Benz-C6-5 (2)

Open”CarProKey”

How-to-Activate-OEM-Benz-C6-7 (2)
How-to-Activate-OEM-Benz-C6-8 (2)
How-to-Activate-OEM-Benz-C6-9 (2)
How-to-Activate-OEM-Benz-C6-10 (2)
How-to-Activate-OEM-Benz-C6-11 (2)

XENTRY Diagnosis
Open”ConfigAssist”

How-to-Activate-OEM-Benz-C6-12 (2)
How-to-Activate-OEM-Benz-C6-13 (2)
How-to-Activate-OEM-Benz-C6-14 (2)
How-to-Activate-OEM-Benz-C6-15 (2)
How-to-Activate-OEM-Benz-C6-16 (2)
How-to-Activate-OEM-Benz-C6-17 (2)
How-to-Activate-OEM-Benz-C6-18 (2)
How-to-Activate-OEM-Benz-C6-13 (2)
How-to-Activate-OEM-Benz-C6-14 (2)

Open Computer –Local Disk C-ProgramData-LicDir copy “lic_key_2.dat”, rename “lic_key_2.x4711″ Set to read-only file

How-to-Activate-OEM-Benz-C6-15 (2)

That’s all.