Thursday, August 12, 2021

VXDIAG Benz C6 Export & Program HU05 Control Module Data

 

How to export HU05 control module data and program by Vxdiag Benz C6 with DTS Monaco software? Check the step-by-step guide in this post.

VXDIAG-Benz-C6-Export-&-Program-HU05-Control-Module-Data-1

Connect Star C6 with the vehicle

Run DTS Monaco software

HU5 Ethernet option cannot be found in the [Diagnostic Services] option

VXDIAG-Benz-C6-Export-&-Program-HU05-Control-Module-Data-2

So exit the software to export the data

Click on [Administrate and manage DTS projects]

VXDIAG-Benz-C6-Export-&-Program-HU05-Control-Module-Data-3

In the [System Configurator] menu, click on [System settings]-> Interfaces]

Check whether the options are correct in [ISO_DOIP_SMR (MVCI_DAIMLER_DOIP_Collection)], [Physical links], [VCI_SMR (MODULE_TYPE_ID_MTS6532)] and [Physical links]

VXDIAG-Benz-C6-Export-&-Program-HU05-Control-Module-Data-4

Then go to Xentry Diagnosis application location

Path: Benz (C:)-> Program Files (x86)-> Mercedes-Benz-> Xentry-> Kontexte-> ODXProjekte-> PKW_COMMON-> dbr

VXDIAG-Benz-C6-Export-&-Program-HU05-Control-Module-Data-5

Copy all the related HU5 control module data and paste to [205 DTS DOIP] file

VXDIAG-Benz-C6-Export-&-Program-HU05-Control-Module-Data-6
VXDIAG-Benz-C6-Export-&-Program-HU05-Control-Module-Data-7

Open [Temporary workspace]

Select all HU5 module data

Then click on [Open]

VXDIAG-Benz-C6-Export-&-Program-HU05-Control-Module-Data-8
Select [MBCar_MBVan_SMR_DiagnosticCVAN_V_02_02]

And then click on [Finish]

VXDIAG-Benz-C6-Export-&-Program-HU05-Control-Module-Data-9

Click on the switch icon

If the Execute broadcast notice pops up with the words “Broadcast might not be supported by the currently activated interfaces” as below, just click on “OK”

VXDIAG-Benz-C6-Export-&-Program-HU05-Control-Module-Data-10

Select [HU5 (UDS_Ethernet)] option to view the software number

VXDIAG-Benz-C6-Export-&-Program-HU05-Control-Module-Data-11

Then select [HU5 (UDS_Ethernet). HU5_HU5_Bootloader]-> [Flash Programming]-> [Temporarily add flash data]

VXDIAG-Benz-C6-Export-&-Program-HU05-Control-Module-Data-12

Select the related flash files and open as below

VXDIAG-Benz-C6-Export-&-Program-HU05-Control-Module-Data-13

Tick all the sessions and click on [DiagnosticService]

VXDIAG-Benz-C6-Export-&-Program-HU05-Control-Module-Data-14

Click on [Read ID] to confirm the software number again

VXDIAG-Benz-C6-Export-&-Program-HU05-Control-Module-Data-15

Switch to [Flash Programming] menu

Click [Stop] to program and refresh ECU
VXDIAG-Benz-C6-Export-&-Program-HU05-Control-Module-Data-16

Operate it until the programming process is completed

Done!

No comments:

Post a Comment